parametric linkage box scaleable + hinge test (print in place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Depth and Width changeable box model + test hinge for print testing to a avoid wastage.
- Ocena
- 4 / 5
- Polubienia
- 27
- Pobrania
- 239
- Wydruki
- 1
- Wyświetlenia
- 1235
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
You can support me here:https://www.buymeacoffee.com/Pandalogy
Print test on X1 Carbon with PLA+
Extruder Flow rate tested on:0.98, internal/Outer/infill setting (outer wall tend to cause print in place to stick together)
Test Hinge can be generated with f3d file but is limited to 2cm height as of current,
Base on latest file(range tested),
- Height: 2-5 cm
- Width: 50-95cm
- Depth: 65-80cm
*Do export file to be use for printing after changing Width and Depth
Width & Depth setting can be change via Parameter which has been favorite.
Height(40mm max per change) setting can be change via Parameter which has been favorite.
Tolerence Parameters that can be adjusted:
- LinkageBuffer buffer space between moving linkage and wall
- CoverFlushTolerences can be increase(Default should be 0) to make cover flush with box when closed
Beta test model.