Pizza Topping Packet Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this box to keep the leftover pizza topping packets we get from the local pizza parlor
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
To organize the pizza topping packets we get from our local Marcos pizza parlor I created this custom size lidded storage box. The packets are 2" wide by 3" tall.
Please add comment to request other sizes or create them yourself with the parameterized Fusion 360 CAD file. Both Fusion 360 CAD file and STEP file included so you can modify/remix as needed.
I printed without support (lid inverted) in PLA, other materials should work. The lid snaps on for nice secure fit, won't open accidently, with my prints you need to lift the latch tab a tiny bit. After printing you may need to clean out the hinge holes with a sharp knife, the pins should be flush on the inside.