Two tiered display stand for decor, figures and mementos
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two tiered display stand for displaying small objects on a bookshelf or desk
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
I designed this two tiered display stand for use on a bookshelf in my home office. The result definitely makes better use of the shelf so I'll print another using Amolen wood PLA.
As modeled it is 248x160x25mm with the lowest level being about 5mm high and the second level 25mm high (or 20mm taller than the first layer).
I decided to print it with Prusament Clear PETG as I liked the looks of it in some other models. I used a 6mm nozzle, 5% infill, and 3 perimeters with the skirt set to zero since the model occupied virtually the whole bed on the X axis.
I think the infill pattern showing through looks kinda neat. The model should print fine with other colors or with PLA.