Corsair HS70 Can Clip With better strength
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Corsair HS70 Can Clip by MattFalbe. I had made his version originally but the 2 halves didn't seem to connect…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 217
- Wydruki
- 3
- Wyświetlenia
- 892
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Remix of Corsair HS70 Can Clip by MattFalbe.
I had made his version originally but the 2 halves didn't seem to connect completely, after some sanding of the part they did fit but this didn't matter as the main thing holding the 2 halves together was the M3 Bolts.
After a few months the clips began to loosen and wobble, and eventually I dropped the headset and the clips broke right at the bolt hole. To help with part strength, I slightly thickened the roof of the bolt hole plus added clips to provide additional strength and hold the parts together at more than one location.
I printed this in PLA with 50% Cubic infill on a Biqu B1 at 0.28mm layer height and -0.04 horizontal expansion.
They now have a more snug fit between the two halves
Category: Other