BTT TFT35 SPI V2.1 Touch Screen housing Voron 0.2 Version 2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 2.0 version of my previous BTT TFT35 2.1 screen housing, that fits the Voron 0.2.
- Ocena
- 5 / 5
- Polubienia
- 136
- Pobrania
- 887
- Wydruki
- 11
- Wyświetlenia
- 4521
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
User Smuk3d asked me if i could create a version of the TFT35 Voron 0.2 housing that moved the viewable area of the screen to center, and allowed for a more symmetrical bezel.
It was alot of work and required a 90ish percent redesign of the original, but I think it might just work.
This model is still in the experimental stage, and may get some changes after he test prints and fits one. I'll update the details here as the project continues.
The screen is held in via 4 m3x8 socket head cap screws, which go into the housing from the back and thread into the accents. The bezel is secured over the accents with a couple drops of super glue, after glueing, the bezel/accents will be one piece.
The bezel will probably give best results if printed using a 0.2mm layer height for the first layer, and 0.1 for all subsequent layers. All of the other parts should be printed with a .25mm first layer, and .2mm subsequent layers.
I tried to design this so that it would require minimal supports, but the honeycomb patter has some fairly long bridges. PrusaSlicer's organic supports set to 30* worked very well for me on a similar design.
Once the design is finalized, i'll upload the .stp files so the remixers out there can make changes and design their own bezels, etc.