Appliance drain hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
30 mm thread diameter 20 mm tube diameter Use this at your own risk.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
30 mm thread diameter
20 mm tube diameter
Use this at your own risk. I am not responsible for any damage caused by using this print.
Since this is supposed to have water flowing though it, please make sure that your print is water tight. Regularly observe for possible leakage.
Print instructions
Print this out of a material with very good layer adhesion so that the print. This helps with making the print water tight. The material should also be able to handle the temperature of hot water flowing through it. I printed it out of Prusament PC Blend, because it can handle boiling water. Definitely check the specifications for your material of choice and make sure it fits your needs. I've used Prusament PETG before and it handled 60°C which is enough for some applications.
Also use a small enough layer height for the thread. 0.15 mm worked fine.