Speaker Stand for Edifier R1700(BT)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A easy to print speaker stand for the Edifier R1700(BT) with a slight angle.
- Ocena
- 4,667 / 5
- Polubienia
- 38
- Pobrania
- 311
- Wydruki
- 5
- Wyświetlenia
- 1815
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A 3D printable speaker stand for the Edifier R1700(BT) Hifi speakers.
The purpose of this speaker stand (as with any speaker stand) is to raise the Hifi speaker from the desk and slightly angle it upwards so the sound wave can pass through better and therefore minimize the resonance from desk surface.
Features
The stand is designed to use the least amount of material while still giving the speakers a firm stand. Despite the speaker stand having only walls it by no means will make it sound hollow. It rather improves the sound image by reducing the amount of sound waves hitting the desk which then resonates and can cause slightly muddier sound.
Instruction
- Download the model and load it into your prefered slicer
- Slice the model and print it
- Optional: you can put on 4 rubber bumpons with a diameter of 8mm
Specifications
The speaker stand was specifically created for the Edifier R1700(BT) Hifi speaker.
Print Settings
- Infill: 10% Gyroid
- Perimeters: 2-3
- Layer height: 0.2mm or 0.3mm
- Supports: none