1 / 2
Garden Irrigation Spray System / Garten Bewässerung System (remix)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Garden Irrigation Spray System / Garten Bewässerung System (remix)
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 2583
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (64)Powiązane
This is a remix of the great Spray System by schiffer-soft. I have change the output-nozzle and delete some parts to print it easier. 90, 180, 360 degrees are available. The other parts like midsection and groundholder you can find in the original linked Post.
O-Ring can be a little bit smaller, i used a 8mm inner diameter O-Ring at the bottom, if you srew it in. works fine. You can print the O-Ring in TPU, see here:
https://www.printables.com/de/model/466301-simple-customizable-o-ring-sealing-ring-for-a-lot-
- Printed with PETG
- Print Settings
- Rafts: No
- Supports: No
- Resolution: 0.18
- Infill: 30-40