Flipper Spring retainer for Kenmore Refrigerator Model 795.71313.310
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This replaces the failure-prone spring retainer in the flipper of Kenmore French door Refrigerator.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Flipper of Kenmore French door refrigerator (Model No. 795.71313.310) is prone to failure due to weak part (the failed plastic was lost but I think this may be better than gluing the shattered plastic back together).
You can hot glue this repair part to reattach the spring to proper place. It's probably OK, but I'll update the model if it cracks.
One of the part goes inside the flipper part, to make the part anchored stronger. You'll need to snip the part off to fit (how much depends on how the part failed). Just wanted to have this up as an example of how to use 3D printed parts on hard-to-fix mechanism.
Update: I've improved the model - the old version broke apart, and found a simpler solution. Please use the newer version.