Star Nut Installer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple tool for installing the Star Fangled Nut on a bicycle fork. Guides the installation straight and sets it at a…
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 468
- Wydruki
- 6
- Wyświetlenia
- 1629
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple tool for installing the Star Fangled Nut on a bicycle fork. Guides the installation straight and sets it at a precise depth of 15 mm.
Print will have a one layer skin across the bolt hole - this is to make it print well. just push your bolt through or use a small file to remove the skin.
Use one M6-1 x 40 mm Hex Head bolt. Push through from top, then thread your star nut all the way on at the bottom.
Slide tool over fork steerer until star nut is resting on the steerer, then drive down with rubber mallet. When the tool bottoms out, simply unscrew and remove. Star nut should be perfectly placed.
Print Settings
Rafts:
No
Supports:
No
Resolution:
.2 mm
Infill:
100%
Filament: Any PLA
Notes:
Use 4 shells for vertical strength.
Category: Hand Tools