Honeycomb Wall Holder - Watch It!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Honeycomb wall holder for watches.
- Ocena
- 4,5 / 5
- Polubienia
- 79
- Pobrania
- 214
- Wydruki
- 3
- Wyświetlenia
- 1917
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
News
- May 6, 2023 added V2 with arm/band size options, improved arm connector
Watch It! Designed to hold your watch and/or collection of watches. Two parts required, the arm with hex insert and the watch band holder. The holder inserts into the arm with a satisifying click.
V2
Improves on V1 with new clip approach and increasing usuable space for the width of the watch band. Arm and hex insert is now flat to the print bed, if using the Honey Comb Wall - Portable Stand then original “insert-empty” is required, otherwise if mounting this to Honey Comb Wall in normal orientation then use insert-empty rotated or multi-positional
- HexWatchArm provide two length sizes - short & medium
- HexWatchBand provides two sizes - 164mm (smaller) & 180mm (normal)
NOTE : Band is push-fit over the arm, the rounded prongs allow for flex. Designed for snug fit, pieces can be removed but not designed for constant plug / unplug.
V1
Original design approach uses arm prongs to clip band holder to band arm.
- HexWatchArmV1
- HexWatchBandV1
Relies on the “insert-empty” hex part used in the HoneyComb Wall.
Hex insert pegs designed with flex in mind so that holder can be inserted without requiring much force to insert or remove from wall.
STL's are ready to print without need for supports. Printed on MK2, MK3 and X1C using PLA+, PETG with no issues.
Designed with .20mm layer height in mind.
Enjoy and remember to undertake responsible watch ownership. Keep those batteries maintained or remove them if watch unused. A watch isn't just for Christmas its for life…