1 / 7
X-axis upgrade with linear rail and 10mm rod Z axis - Bear Prusa MK3 / MK3s / MK3s+ — zdjęcie 1
1 / 7

X-axis upgrade with linear rail and 10mm rod Z axis - Bear Prusa MK3 / MK3s / MK3s+

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

X-axis upgrade with linear rail and 10mm rod Z axis - Bear Prusa MK3 / MK3s / MK3s+

Ocena
5 / 5
Polubienia
63
Pobrania
240
Wydruki
3
Wyświetlenia
4074
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

I redesigned a great project from MW which can be found here:

X-axis upgrade with linear rail, belt tensioner and bearing clamping - Prusa MK3 / MK3s / MK3s+

I love this design but wanted to use 10mm linear rods for the z axis :)

What you need:

 

Print files

X-axis-motor-side_10mm_rod

X-axis-Idler-side_10mm_rod

Z_motor_mount_10mm_rod

Z_top_10mm_rod

Print files by Boogie:
1x      x-end_tensioner_boogie.stl

Z_top_10mm_rod_temp_sensor - Optional printing if you want to mount the temperature sensor on top of the printer

Bearings/rods:

2x 10mm linear rods 320mm long

2x Misumi LMUW10 bearings

Additional Parts from here:

https://www.printables.com/pl/model/281590-x-axis-upgrade-with-linear-rail-belt-tensioner-and

And you will need most of the screws from your existing X-Axis.

Print settings:

Material: PETG
Infill: 20%
Perimeters: 4 
Layer height: 0,2 mm
Support: no

Tagi