Magnetic cable clips - updated
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic clips that help keep thin cables in place. For USB cables, power cords and other cables up to 4, 5 and 6 mm
- Ocena
- 4,833 / 5
- Polubienia
- 83
- Pobrania
- 282
- Wydruki
- 6
- Wyświetlenia
- 1512
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update April 2025:
Now with three versions, for cables up to 4 mm, 5 mm and 6 mm in diameter
On my Original Prusa Enclosure is mounted a Raspberry Pi with a touchscreen and also a filament dryer stands on top of the box.
Both devices have a power supply, and the two cables run from the power outlet along the case frame up to the top.
To keep the cables neatly routed, I use these little clips made of PLA, each containing two 5x3mm magnets.
The holes for the magnets have nearly the same diameter as the magnets, the magnets fit very tight, they have to be pressed in. This allowed me to assemble them without glue. I used pliers to press in the magnets.