1 / 1
SME 3009 Series III Tonearm Wand — zdjęcie 1

SME 3009 Series III Tonearm Wand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The tonearm on my turntable broke, so I printed a new one! This is specifically for an SME 3009 Series III Tonearm.

Ocena
0 / 5
Polubienia
8
Pobrania
79
Wydruki
0
Wyświetlenia
852
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial

The tonearm on my turntable broke, so I printed a new one!  This is specifically for an SME 3009 Series III Tonearm. This was kind of a pain to model and print, so the fitment might be a little off.  I reduced the tolerances on the holes from the one I printed, so it may work fine for you, but things might still be a little tight and you'll need to bore out the holes or sand things down.  I've included the 3mf files so you can make adjustments.

Print with supports.

Tagi