US-mailbox-mounting-base for Refugee Birdhouse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I thought about mounting the Refugee Birdhouse to our US-mailbox - that's what finally came out of the idea.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
As I printed the GREAT remix of the bird feeder https://www.thingiverse.com/thing:4058521 I thought about mounting it to my US-Mailbox in our garden. Therefor I took the measures of the mailbox and tinkered something new that fits to the mounting holes of the birdhouse.
The 2nd attempt was already sucessful and so I used some rubber monting tool from my car to mount it temporarily to my mailbox.
Print instructions
Category: Outdoor & Garden Summary
For mounting to the birdhouse you'll need 4 M3x10mm screws and M3 nuts.
The base was printed using a 0.6 nozzle at 0.35 layer hight and 80mm/sec maximum speed within 3 hours and 11 minutes.
Feel free to download and/or customize it and leave me a like if you like it - or even better you can post a make
Print Settings
Printer Brand: Creality
Printer: Ender 3 Pro
Rafts: No
Supports: No
Resolution: 0.35
Infill: 25% - cubic
Filament: Technologyoutlet PLA brown
Notes:
I printed this with a 0,6mm nozzle that's why the resolution is rather high. With a 0,4mm nozzle I would recommend a resolution of about 0,2 to 0,25 (man, it's outside on the mailbox - it doesn't have to be super perfect and smooth) ;)
Post-Printing
What to do when finished? Just drill...
I used a 3mm drill to perfectionate the mounting holes so the M3 screws are easier to insert - as I am using nuts anyway. It's very windy here sometimes so it was my intention to let the birdhouse survive some storms without breaking off the screws.
How I Designed This
As always - a tinkercad creation...
...as I still didn't take the time to get "familiar" with fusion 360... ;)