Another inline clip mod for Nerf Big shock (Telcon's Short Ver.)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Short Ver for those who want a 3-4 Dart version with similar performance to the existing big shock mod.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 1028
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I made a 'short ver.' for those who want similar performance to other big shock mods.
- Can be converted by replacing some parts
- Same required hardware as '6-7 dart ver.'
Hardware
Mainly M3 series bolts and locknuts are required.
- M3 Lock nut - 7
- M3x10 (Socket head) - 1
- M3x12 (Socket head) - 5
- M3x16 (Flat head) - 1
https://www.printables.com/model/449919-another-inline-clip-mod-for-nerf-big-shock-telcon-
(No additional hardware is required once you have built this.)
Printing
All parts are designed to be printed without a supporter according to the overhang setting. (However, please decide whether or not to support it according to your printer settings.)
Print some parts using brim or raft.
Please be careful as there is an Printing difficulty of the Body 1 and 2 parts.
Ass'y Guide
Please refer to the following guide image.
