Pegboard Wall Standoffs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
8mm quick-print standoffs/spacers for mounting pegboard to a wall. Includes screw bushing.
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 318
- Wydruki
- 2
- Wyświetlenia
- 1027
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I am adding some pegboards to my workshop area and I realized I needed some standoffs to give them consistent space off of my walls. What's more, the mounting screws I have were just a bit too small to work through the holes of the board - so I did a little CAD to solve the problem - and hopefully it can help you out too!
These spacers slot into the backside of your pegboard on the holes you want to use for mounting. Their inner diameter is sufficiently wide that mounting screws don't bite into them. The front bushing slots in as well, and gets pinched by the screw when tightening to secure the board!
I'd love to see your uses/makes of these on your own pegboards. Comments & criticism always welcome.