Recycled Suspended Planter (with a Can)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hanging flowerpot made by adapting a tin can with 3D printed parts !
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
PROJECT PRESENTATION
I recently collected a new plant, but I couldn't find where to put it in my apartment. So I made this little design to transform an 850ml can (European dimensions Ø99mm) into a hanging pot.
You will need the following material to complete the construction:
- A can ring (printed)
- A spinning hanger (printed)
- A hook (several inner diameters available) (printed)
- A FHC or CHC M5x20 screw
- Rope
For the assembly :
- Screw the hanger with the hook using the M5 screw
- Pass the can ring around the can from the bottom
- Thread the 3 wires and make knots at the ends
- Enjoy
To be noted : I only made the ring I needed, don't hesitate if you have other needs!
Enjoy printing !
UPDATE
No update yet
Custom Section
Do you think I did a good job?
Feel free to comment what you think of this design and tell me how you use it!
If you want to help me, don't hesitate to visit my paypal.me for the price of a nice croissant !
Category: Containers