Kuat Grip 6 Ski Rack Storage Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carry and easily store a Kuat Grip 6 ski rack in the shed. Used with 3/4" PVC.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 669
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Public Domain
This was a quick and dirty way to store my Kuat Grip 6 ski rack. There are a number of pieces that allow you to clip the ski rack to this, carry it via handle and then hang with some hooks. Still rather heavy so please be careful when carrying and/or hanging.
Printing:
-I would suggest something strong (PETG, PC, ASA) as the rack is rather heavy. I used PETG 0.2mm works fine
-5 perimeters
-CenterHandle 1x
-KuatHolder (End pieces) 2x
Print CenterPiece and Hanger at 101% to slide more easily with PVC
-CenterPiece 1x
-Hanger 4x
Assembly:
-3x M3 screws for CenterHandle + CenterPiece
-3x M3 hex nuts
-¾" PVC - 2 pieces, cut to length needed depending on how you've placed the rack mounting points
-Utility hooks: https://www.homedepot.com/p/Everbilt-3-9-in-Zinc-Plated-Utility-Screw-Hook-2-Pack-43054/205883114 (optional if you want to hang)
-Pipe cement to fix things in place
You'll need to adjust the spacing of the Hangers on the PVC to make sure it's in balance before gluing. I attached the ski rack, slid the hangers to where I could lift with the handle without the rack tilting and then marked the hanger locations before gluing in place.