1 / 3
Keebio Sinc Adjustable keyboard case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Work in progress…
In Progress:
- The left side needs a little wiggle room for the PCB
- Case to slide into.
- Wrist rest with adjustable feet to match.
- Rework top covers to not need the plates from Keebio merging.
Version: 2
Notes:
- Adjustable feet allow for changing the tilt to what you want.
Can only thread so much into the case so different heights of threaded feet are available. - Top does not have anything holding it to the base. Redesign will fix that.
- Can use the Link if don't want a big gap between the boards.
- Recommend 10mm*3mm Rubber Feet to put on the legs.
- https://www.amazon.com/dp/B09LCPBMS3?ref=ppx_yo2ov_dt_b_product_details&th=1
- Note adhesive is a little weak on those.
- The keycap puller should fit in the top left slot. My print has had issues to test this.