1 / 4
Fatshark Dominator Avatar HD03 Walksnail Antenna
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thank you Shawn Morrison ~ LetsFlyRC ♥ 3D printed faceplate for the walksnail goggles.
- Ocena
- 4 / 5
- Polubienia
- 8
- Pobrania
- 59
- Wydruki
- 2
- Wyświetlenia
- 1058
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (12)Powiązane
Thank you Shawn Morrison ~ LetsFlyRC ♥
--
Changes:
● Reduced wall in front of antenna to 0.8mm
● FDM printable
● M2 Heat-Set Inserts
● Simplified
What you need:
4x M2 Heatset insert
2x M2 20mm (or longer)
2x M2 16mm (or longer)
https://www.truerc.ca/shop/for-walksnail/x-air-5-8-mk-ii-4-pack-for-letsflyrcs-faceplate
Print Settings
Printer Brand:
VoronDesign
Printer:
Voron 0
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20
Filament: ABS/ASA White