Honeycomb Storage Wall Edges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall edges for the Amazing Honeycomb Storage Wall project by @RostaP.
- Ocena
- 4 / 5
- Polubienia
- 669
- Pobrania
- 2001
- Wydruki
- 1
- Wyświetlenia
- 10 508
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
This is my second 3d printable design I ever created, so please bear with me. I designed this to give the Honeycomb Wall some clean edges for those who want to put it at the edge of a wall or for those who do not like rough edges. I have not printed these yet because I am still busy printing the wall panels.
I made this using Tinkercad.
If you are using only one panel, you can find the edge files in the “HCW-edges-for-one-panel.zip” folder. Please note that you only have to print 2 of each side and flip them around to fit the panel. The tolerances are very tight and some sanding might be required.
If you are using 4 panels, you can find the edge files in the “HCW-edges-for-four-or-more-panels.zip” folder. There are 8 different colours (4 x light and 4 x dark) and you have to print 2 of each colour because they are different sizes. First, align all the parts to the edges and then glue the straight bars to the corresponding coloured wavey parts as in the pictures. You can use CA glue or double-sided tape (the thin kind) to attach the sides to each other.
In theory, for each extra panel you use, you must print extras of the Pink (HCW Part Edge - Outer 2 & HCW Part Edge - Inner 2) or Yellow (HCW Part Edge - Outer 4 & HCW Part Edge - Inner 4) parts or both. I only went up to 4 panels but feel free to mod the files to fit your needs. I think that this is a good start to get anyone going on this amazing Honeycomb Wall project.
I hope this all makes sense and you can figure it out.