1 / 4
Maker wallet v2: card wallet with cash/coin pocket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A card wallet (up to 5 cards) with a compartment for cash or coins. Fully 3D printable, easy assembly, customizable
- Ocena
- 4 / 5
- Polubienia
- 66
- Pobrania
- 460
- Wydruki
- 3
- Wyświetlenia
- 3118
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (1)Kolekcje (77)Powiązane
This is a fully 3D printable wallet, a remix of the amazing Maker Wallet of Agustin "Flowalistik" Arroyo. I modified the lid and the coin pocket for more comfortable use.
Download the STL to start printing or the STEP file if you want to customize or remix the design.
Features
- Up to 5 standard-size cards
- Room for bills and other small objects
- Lock mechanism
- Customizable back and front
- Fully 3D printable
- 15-second assembly
New Features in v2
- Modified lid for better grip
- Added a slope in the pocket for easy removal of coins/cash
Making tips
- Use a 0.4mm nozzle
- Print settings: 3 perimeters and 0.2mm layer height
- Loose lock mechanism? Play with the slicer’s tolerances settings to fix it
- Adhesives are not required, but you can add some glue where the lid and lever connect for increased rigidity
- If the fit is too tight, a little sanding might help
Assembly instructions
- Print all the 4 MW files
- Insert the lever at the bottom of the body
- Slide the cash_pocket in the body
- Insert the lid in the body: the lid pin should enter the lever hole
The “Don't panic” patch is available at: https://www.printables.com/it/model/467678-dont-panic-patch. It was glued with super glue.
Enjoy!