Cluster Mount Plate for Pi/2.5" Drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found an acrylic Pi cluster mount on ebay cheap. I designed a spare mounting plate in case I needed extras.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Have a cluster enclosure for my array of rPi & 2.5" HDDs .. this is the mounting plate.
Screw holes should line up good, the tabs you see on top and in rear would slide into holes of the same distance .. the L shape tab at the top flexes letting you line up the top two nubs holding everything together with tension.
I originally posted this because I was going to make my own enclosure using the same mounting that was smaller than the one I have but .. nah.
Also, this was imported from thingiverse, I lost the original I designed on my PC so I want to retain this as a backup.
Notes:
100% Infill
No Supports, brims, rafts
PLA