Seiko SKX007/009 Tuna Type Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Tuna Type Shroud I designed and made similar to the Dragon Shroud being sold online. Print this with some…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 108
- Wydruki
- 1
- Wyświetlenia
- 813
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
This is a Tuna Type Shroud I designed and made similar to the Dragon Shroud being sold online.
Print this with some supports, if you can break it up and avoid it in the corners it can be easier to remove. It is designed with some 45 degree chamfers so if you can only support overhangs greater than 45 then that avoids unnecessarily supporting these areas.
I have attached the .sldprt file alongside, I apologise if you have to open it and use it, I did not do a very good job of making this in a logical way.
Please show me any photos of prints you have made!
Thanks
Print Settings
Printer:
TronXY X1
Rafts:
No
Supports:
Yes
Resolution:
0.2 or less (I used 0.1)
Filament: Suuntu PLA+ PLA
Category: Fashion