1 / 5
Magnetic door stop - steel doors - TPU center section — zdjęcie 1
1 / 5

Magnetic door stop - steel doors - TPU center section

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I needed a door stop that was easy to use because my walkout basement door is pretty high off the ground due to the…

Ocena
0 / 5
Polubienia
9
Pobrania
48
Wydruki
0
Wyświetlenia
851
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I needed a door stop that was easy to use because my walkout basement door is pretty high off the ground due to the footing. So I came up with this. I used 5 10x3mm round magnets because I had a bunch. Super glued them in. You could also use it on a wood door by attaching a large washer to the door side. I printed the coupler center section out of TPU to keep it from getting broken so easily. Uses a M4x40mm screw and nylock nut. I included 2 lengths of couplers based on how far your door is from the wall. Also, included the STEP file so you can adjust it easily.

Magent:
https://www.amazon.com/gp/product/B07KLZDTMM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Print instructions

All print without supports, PLA is fine. Printing the coupler from TPU keeps it from breaking due to strikes.

Tagi