Ark Nova Magnetic Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic insert with double layer boards for the board game Ark Nova!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 1676
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
A remix of the original project by jacques_za.
I've remade basically the entire thing besides the beautiful tile holders, where I've just added some Ark Nova logos.
The player boxes are magnetic, you'll need 2x1mm magnets. In total you'll need to print 4 boxes and 4 lids. There are two versions, push fit and to be glued. The hole for the glued ones is slightly larger to accomodate the magnets, while in the push fit ones you will need to properly align the magnets and then I've used a small hammer and a small wood stick to secure the magnets inside.
For the placement of the tiles, check out the original project.
You'll find the double layer boards here, remixed by me: https://www.printables.com/it/model/457718-ark-nova-magnetic-dual-layer-player-boards
Printed with standard PLA on a Bambu Lab P1P.
No brims or supports needed.
Layer height: 0,12mm
Infill: 15% should be enough