1 / 4
Pegboard holder for Shimano 11/12 speed road cassettes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds a Shimano road cassette on pegboard. Optimized for MDF pegboard.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (31)Powiązane
After I posted the original cassette holder on Instagram, I got some interest in a pegboard version. Here's that version which will support Shimano 11 and 12 speed road cassettes with the lockring.
Print on its side with at least 4 shells. Suggested 0.2mm layer height, but finer would also work. Support is recommended under the pegs, but should not be necessary anywhere else.