90° adapter for air conditioners with 15cm hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
90° Winkeladapter für Klimageräte mit einem 15cm Schlauch.
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 320
- Wydruki
- 0
- Wyświetlenia
- 1161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
90° adapter for air conditioners. Hose diameter is 15cm. The bottom is flattened to fit my BambuLab printer and print faster. Have to the original in terms of wind speed only 0.2m/s loss (original 9.6m/s - 90° adapter 9.4m/s). Please print with at least PETG. Depends on the air conditioner. It has two versions with different flat bottom. Support only outside necessary!
-
90° Adapter für Klimageräte. Schlauchdurchmesser ist 15cm. Der Boden ist so abgeflacht, damit er in meinen BambuLab-Drucker passt und schneller gedruckt ist. Habe zum original in Sachen Windgeschwindigkeit nur 0.2m/s Verlust (Original 9.6m/s - Winkel 9.4m/s). Bitte mit mindestens PETG drucken. Abhängig vom Klimagerät. Es hat zwei Versionen mit unterschiedlichen flachen Boden. Support nur aussen nötig!
Gewinde übernommen von wejn.