Valve stem CAPpuccinos
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add a little extra energy to your ride with these valve stem CAPpuccinos!
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 174
- Wydruki
- 4
- Wyświetlenia
- 786
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Looking to add a little pep to your step? Look no further these valve stem CAPpuccinos are proven to give you .5 extra horsepower. These valve stem caps should fit on most Schrader valves. Meaning they'll fit a lot of common bicycle and automotive tires.
Bill of materials:
Roughly 5 grams of filament. Came out to around .12 cents in material for a pair.
Printing:
Really easy print. No supports needed. Just print in the orientation provided in the .stl. To achieve the look I did a few color swaps. One at 5.20 (layer 26), 12.20 (layer 61), and one at 17.20 (layer 86).
Layer height: .20 mm
Infill: 10%
Brim: I did but you may not need to.
Assembly:
Thread the caps on the valve stem and cruise to your favorite coffee shop.
Notes:
Enjoy and please share your makes. :)