Top Gear Lap Time Letters with Embedded Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Top Gear Lap Time Letters with 5x10mm neodymium magnets embedded in the print. Bonus dry erase marker holder.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 549
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a recreation of the Top Gear Lap Times letters using the Nuber Black font with embedded 5x10mm neodymium magnets. I've also included a dry erase marker holder (diameter of marker <19mm).
The letters use 22 magnets while the marker holder uses 2, so a pack of 30 should do the trick: https://www.amazon.com/Decorative-Fridge-Magnets-Building-Scientific/dp/B07VZN77RP
The .3mf and gcode files have the appropriate placement and pause for the print on an MK3S+ printer. I've slowed down the first layer to get good adhesion. Total print time 14h18m with the pause at 11h56m.
NOTE - YOU HAVE TO PRINT OFF THE SD CARD FOR THE PAUSE TO WORK. If you print with Octoprint, for example, the print won't start correctly after the pause.
More info on the board: I bought a 2'x4' piece of galvanized sheet metal at Lowe's and glued it to a 2'x4' piece of 1/4" plywood, then mounted it to my wall with concrete bolt anchors. The letters are printed in red Hatchbox PLA. Then I bought some 1" magnetic tape and voila. Total cost was around $85