Creality Sprite/Sprite Pro 4010 Hotend Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4010 fan from the sprite part cooler, used as the hotend fan cooler.
- Ocena
- 4,857 / 5
- Polubienia
- 58
- Pobrania
- 384
- Wydruki
- 8
- Wyświetlenia
- 2972
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — NoDerivatives
I wasn't happy with the 4020 Noctua fan, so I decided to use the 4010 that came from the part cooler on the hot end. It's a lot more tolerable than the stock fan, and will be a good upgrade for anyone that has an extra 4010 fan laying around.
CR Offsets - 0Y , X-49
Print instructions:
0.12 layer height, 3-4 walls, 0.4 line width, 35% infill grid, PETG or better.
Build Instructions:
For the fan - use the shorter screws that came with the stock part cooler to mount the fan. The fan is a tight fit, so you will need to slip it on.
To mount the bracket, use 2 m3x6 screws for the CR side, and the normal screws for the rest.
CR will need a m3x5 and 2 nuts.
Step files and model will be for sale on Cults3D.