9 Tube Glockenspiel Instrument / 8 pipe Windchime or Plinker Xylophone with 3D printed plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The 3D printed support for the 9 cut steel conduit pipes of varied length to produce an octive plus one note,
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 894
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
This instrument is 90 percent recycled material, and sounds good.
A glockenspiel or tubular bells is a percussion instrument consisting of pitched steel pipes cut in lengths to produce notes. The glockenspiel is played by striking the tubes with a metal mallet or(spoon) in this case. This causes the tube to ring. In my design here it can also be used as a wind chime.
The pipes (made from waste electrical conduit) have holes drilled through them to hold a suspension cord made by elastic bands (from disposable face mask straps). The Mallets made with chopstick from Chinese takeout food for handles.
I Cut the length of pipes till i got the tone and ring I wanted, shorter ones were higher pitch..
I cut and filed until i got the ring sound i wanted, and eight pipes sounding like a musical octave. I numbered them once I got the 8 tone sounds I wanted.
I made the body initially for use as like a xylophone but I would rather hear the pipes ring rather than plink… being I had already printed the body/supports, I chose to modify my method of using the support and used it to suspend the tubes using the elastic bands.
Now, When I had drilled my pipes I didn.t get the holes straight through the middle with the hand drill so they came out imperfect as well… I should have made a drilling jig with my printer so I could drill all my tubes uniformly.. oh the after thoughts.
I created this for the contest of musical Instruments.
The pipes I cut sound great, so I made ringlets for the tubes to hold in the support body.
This instrument has evolved considerably through its development during this contest and will its works will be open source upon the completion of this contest.
Amazingly the pipes resonate nicely just sitting on the triangular stand. I have still been pondering a way to secure the pipes though