Foxalien Masuter Pro Control Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Larger Control box with better cooling needed when using larger stepper motors
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 801
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
EDIT - 8/5/23
Modded the box to include some side vents in case you want to stand it sideways. Also added a hooded Fan Grille.
I upgraded to higher torque 2.1a motors on my masuter pro and pretty quickly the stepper drivers got hot and the board shut down.
This is a larger control box which takes a 60x15mm axial fan to keep the stepper drivers cool (I hope)
Should be an easy print in PLA or PETG whatever your choice. I'd recommend 0.2mm layers as there are some angled overhangs.
Supports are up to you - if your printer bridges well.. dont worry.. I used Prusaslicers Organic Supports on selected openings but not all. Dont use supports on the Foxalien logo.
You may need to reorientate it when slicing.
You will need a 60x15 axial fan - JST connector / Crimps and a few M3 screws