Freezing Pixels - Infill Drink Coasters - Set of 12
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
3,27 € – 3,99 € netto (bez VAT)
Dla pliku: freezingpixel_coasterset_container_02mm_pla_mk3.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 3,63 € netto (środek widełek).
- Masa podana przez autora
- 39 g
- Czas druku podany przez autora
- 3,94 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A set of 12 coasters with a storage container, all based on the different infill patterns that are available in Prusa…
- Ocena
- 4,9 / 5
- Polubienia
- 555
- Pobrania
- 1972
- Wydruki
- 19
- Wyświetlenia
- 14 457
- Oceny
- 20
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- GNU General Public License v2.0
A set of 12 coasters with a storage container, all based on the different infill patterns that are available in Prusa slicer. The coasters are printed in two different colors with a color swap on layer 3.
Print instructions
The set is printed 0.20mm in two different colors with a color swap on layer 3 to have a contrast color in the bottom layers.
The four 3fm files contain the coasters 3x4 and the container. All ready to print when the gcode is created!