Thunder Laser honeycomb flashback standoffs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips and standoff to keep your laser-able materials off the honeycomb bed to avoid the flashback stain on the bottom.
- Ocena
- 4,333 / 5
- Polubienia
- 97
- Pobrania
- 1089
- Wydruki
- 4
- Wyświetlenia
- 3788
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
These clip standoffs fit snuggly in the honeycomb tray of my Nova 24/60 Thunder Laser. They lift the material .125" off the tray, the clips hold it securely in place while the support standoffs are for supporting the center span, if needed. They can be rotated without losing their grip inside the honeycomb. I created a 3mm, 4mm, 5mm and a 6mm clip (all marked on top), to accommodate most materials used in the laser. These allow the bottom of your lasered material to stay clean of flashback marks and lets you clearly see when the item drops after a successful cut. This will allow you to re-run additional passes in order to save any uncut sections of designs by having the instant visual feedback, helping to reduce wasted time, materials and frustration.