Ender 3 S1/S1 pro - Locking Bed Level Knob - 60mm Dia
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bed leveling knob for the ender 3 s1/s1 pro with locking features and tactile feedback. Remixed to 60mm Dia.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 340
- Wydruki
- 3
- Wyświetlenia
- 1879
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Locking bed leveling knob for the Creality Ender 3 S1/S1 Pro remixed from my larger 70mm Dia to the standard 60mm Dia. This design has snap features that keep the knob in place during/in between prints; so no more vibrating out of position or accidentally nudging the knob. The snap features also give tactile feedback so you know how much you have raised/lowered the bed; with this geometry, 1 click will raise/lower the bed .01mm.
Additional instructions can also be found on the original model - https://www.printables.com/model/422895-ender-3-s1s1-pro-locking-bed-level-knob
Note, this was a requested remix and I have not personally tested it so feel free to let me know if there are any problems with the model.