Z Axis Camera Arm Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Z Axis Camera Arm Extension to allow for a forward view of the print while also raising with the Z Axis.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to get the forward view for the time laps witch would include the perspective of the raising Z axis. I designed 2 different arms, one in the the box girder look, and one with a simpler box design. I though the Box girder would use less filament and be lighter, but after slicing each the Box girder model took longer to print and use more filament. So in the end, I went with the simpler design. But I added bot incase any one wanted to more industrial look.
Printed in PLA on an SV06 Plus. The model in it's current form is too larger to be printed on the ender 3. If asked I will modify it to fit the smaller build plate.
It required an additional 1/4" x 3/4" Stainless Steel Hex Bolt and 2 Nuts to attach it the the Z Axis Camera Arm.
I'm not sure how attractive it looks but it did give me the desired prospective for the Time Laps prints.