Astro Mixamp Under-Desk Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To continue to remove clutter, I've been mounting things underneath the desk. Here is the mount for an Astro Mixamp Pro
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 697
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
About a year and a half ago I was on a quest to remove as much clutter as I could from the top of my desk. I've gotten better at it over time, but this is one of the first things I made.
This fits some older generation Astro Mixamp Pro (and TR models). The fit is a little bit loose (I didn't get the angle exactly right), but putting a piece of rubber (I wadded up a rubber band) gives a good tight fit against the desk and no moving parts.
Printed with 0.2mm layers in Prusament PLA, this was printed with minimal supports for the fastener ‘wings’.