1 / 11
1961 Lamborghini Miura wheel rim — zdjęcie 1
1 / 11

1961 Lamborghini Miura wheel rim

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is the 1961 Lamborghini Miura wheel rim. The Lamborghini Miura was the first supercar mass manufactured.

Ocena
5 / 5
Polubienia
31
Pobrania
189
Wydruki
2
Wyświetlenia
1045
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is the 1961 Lamborghini Miura wheel rim.

The Lamborghini Miura was the first supercar mass manufactured.

I modeled the Lamborghini Miura rim in Catia V5.

There are two printing options, the complete rim or divided into two parts. Two-part printing reduces print time by reducing supports.

Fillamentum was the filament sponsor for this project. So thank you Fillamentum. Go check out their filament here:

fillamentum.com

Printer: Ultimaker 2+
Filament: Fillamentum.

Fillamentum Extrafill Filament PLA Gold Happens

https://fillamentum.com/collections/pla-extrafill/products/fillamentum-pla-extrafill-gold-happens

Fillamentum Extrafill Filament PLA Rapunzel Silver

fillamentum.com/collections/pla-extrafill/products/fillamentum-pla-extrafill-rapunzel-silver

Fillamentum Extrafill Filament PLA Traffic Black

fillamentum.com/collections/pla-extrafill/products/fillamentum-pla-extrafill-traffic-black

If you're going to print this, be aware that scaling it down may cause some problems. The brand shield will become to small to print.

Soon I will introduce some change to simplify the printing at small scales.

Check me out on Twitter: @nachete2016

Print instructions

Category: Vehicles Summary

This is the 1961 Lamborghini Miura wheel rim.

The Lamborghini Miura was the first supercar mass manufactured.

I modeled the Lamborghini Miura rim in Catia V5.

There are two printing options, the complete rim or divided into two parts. Two-part printing reduces print time by reducing supports.

Fillamentum was the filament sponsor for this project. So thank you Fillamentum. Go check out their filament here:

fillamentum.com

Printer: Ultimaker 2+
Filament: Fillamentum.

Fillamentum Extrafill Filament PLA Gold Happens

https://fillamentum.com/collections/pla-extrafill/products/fillamentum-pla-extrafill-gold-happens

Fillamentum Extrafill Filament PLA Rapunzel Silver

fillamentum.com/collections/pla-extrafill/products/fillamentum-pla-extrafill-rapunzel-silver

Fillamentum Extrafill Filament PLA Traffic Black

fillamentum.com/collections/pla-extrafill/products/fillamentum-pla-extrafill-traffic-black

If you're going to print this, be aware that scaling it down may cause some problems. The brand shield will become to small to print.

Soon I will introduce some change to simplify the printing at small scales.

Check me out on Twitter: @nachete2016

Print Settings

Printer Brand: Ultimaker

Printer: Ultimaker 2

Rafts: Doesn't Matter

Supports: Yes

Resolution: 0.2 layer

Infill: 18%

Filament: Fillamentum PLA Gold Happens, Rapunzel Silver and Traffic Black
Notes:

Body rim: 0,4 nozzle / 0.2 layer / 50º supports overhang angle.

Central wheel wing nut: 0,4 nozzle / 0.2 layer / 50º supports overhang angle.

Brand shield: 0,25 nozzle / 0.15 layer.

Tagi