1 / 4
Curved 4 to 1 bowden/ptfe tube joiner/splitter — zdjęcie 1
1 / 4

Curved 4 to 1 bowden/ptfe tube joiner/splitter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

As the name.

Ocena
0 / 5
Polubienia
27
Pobrania
134
Wydruki
0
Wyświetlenia
1572
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Similar to previous model, but with curves instead.

 

Tested with BAFS v.01 and cheap no brand (white,  green and bright orange) PLA and  Sunlu PLA+ which has been exposed to open air for about 1 month (pink and black).

See the pictures on how bad the stringing was, the water dragon model was taken from https://www.thingiverse.com/thing:2376420, scaled down to 75%.

To properly use this model, please go to my page on buymeacoffee.com. I made a guide there: https://www.buymeacoffee.com/yonitjio/designing-bafs-part-4-no-jam-ptfe-tube-splitter 

PS: You need to be my supporter to see the guide.

 

Update: 

2023-05-23 - Add thicker exit port version

Tagi