1 / 1
Y Ptfe Coupler for Capricorn PTFE Tube and Pc4-m10 Inserts (Fail)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since i began to print with PLA as Support in my Petg prints(without MMU, only with M600 code)i needed a Filament guide
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 677
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
Since i began to print with PLA as Support in my Petg prints(without MMU, only with M600 code)i needed a Filament guide. I wanted to give Lars becker credit. Even if my File is Original, the idea was from him.
You need to print this vertically.
Just notized, that this is not working for me. But i will leave it online for others to improve