Small Edgelight Display stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small Displaystand that can accept engraved plates for edgelighting
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
I made this small edgelighting stand as a gift, different engraved plkates can be inserted, i used a lasercutter to engrave the plates but its also possible to do with a router or by hand.
i designed the model in two pieces so it wouldnt need any support, i used superglue to glue the two pieces together. for the electronics i used a 12v ledstrip and a barrel connector with fuse and switch.
Fuseholder: https://www.amazon.de/gp/product/B07TK1T7B3/ref=ppx_yo_dt_b_asin_image_o00_s01?ie=UTF8&th=1
Fuse: https://www.amazon.de/gp/product/B01AWB44AI/ref=ppx_yo_dt_b_asin_image_o00_s01?ie=UTF8&th=1
Switch: https://www.amazon.de/gp/product/B07VHMCGR4/ref=ppx_yo_dt_b_asin_image_o00_s02?ie=UTF8&th=1
Barrelplug: https://www.amazon.de/gp/product/B0975TSZRV/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1
LEDstrip: