X1C 4"/100mm Straight Exhaust Vent (AMS-hub compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
X1C Bambu Lab exhaust vent for 4"/100mm ID diameter hose. This exhaust is AMS-hub compatible.
- Ocena
- 5 / 5
- Polubienia
- 63
- Pobrania
- 440
- Wydruki
- 4
- Wyświetlenia
- 2447
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I recently upgraded to the AMS-hub for my Bambu Lab X1C and didn't see any exhaust vent mods that fit it so I decided to remix one and make a few changes.
This exhaust vent is designed to fit a 4"/100mm ID ducting hose. There is a slight taper that should help with putting the hose on.
3 holes surrounding the exhaust need to be tapped. They tap easily for m3 screws and the model is designed to use it. There is a fourth hole on the left side that lays on top of an existing screw but you don't need to use it and I left it there as an indicator for alignment.
BOM:
3x M3 x 6 hex socket head screws.