Nissan GT-R R35 Apple Lighting USB Centre Console passthrough
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to replace the standard USB socket in the centre console armrest with Apple Lighting cable
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Share Alike
Recently i did a mod to my R35 GT-R so that i can have Apple carplay and other stuff. I retro fitted the Nifty City carplay kit but i needed to plugin the audio interface under the armrest. I don't like to see messy cables so i have rerouted the USB connectors to the nifty city unit and made a small plastic piece to replace the standard USB socket in the armrest. You can push a lighting connector through this piece. Pull a big tyrap through the hole at the back to secure it in the armrest.
I printed this in Nylon CF on my bambu, i would not print this in PLA considering the car can get quite hot inside. I also printed this at a 45 degree angle with a big brim; that way you don't need supports.