AeroGarden Harvest 360 Trellis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So growing tomates in a harvest 360 is a bit of a chore. i waited too long to put this in but it is in now. this works…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 792
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So growing tomates in a harvest 360 is a bit of a chore. i waited too long to put this in but it is in now. this works great even for heavy loads. it is wide open enough that you can fill the water easily. There are holes at the back so you can zip tie it in place.
If you are growing tomatoes especially, you will need this as they fruit so many tomatoes at a time. get this in there before the plant is too large to fit it in there.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S+ revo6 0.6mm nozzle
Rafts:
Yes
Supports:
Yes
Resolution:
0.400
Infill:
15
Filament: overture petg green
Notes:
if you have problems inserting the legs use a little wax on the tip to make it go in smoothly.
Category: Outdoor & Garden