Lithophane holder 100mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lithophane holder 100mm Battery operated
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 355
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Public Domain
Battery led operated lithophane frame.
It can contains 100x100mm photos, it opens on the top for easy swap of the lithophane.
I tryed printing it without support and turns out fine for me, i also print one with support only in the front-top overhangs and came out perfect.
Link for make lithophane: https://lithophanemaker.com/Framed%20Lithophane.html
link for leds: https://www.amazon.it/dp/B0B68ZY47B?ref=ppx_pop_dt_b_asin_title&th=1
I prefer cool white, but its my preference. Bought the 10LED one, but works fine also with the 20LED one.
Print setting (0.4 mm nozzle) :
0.2mm layer height
15% INFILL
Support No/yes Read above
Printed with the speed profile on PrusaSlicer
I also give the FreeCad file if you need to make it wider or taller.