1 / 6
Mobile Phone Stand: Compact, Foldable, Print-in-Place
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With the footprint of a credit card, this compact and robust mobile phone stand fits in your pocket.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 202
- Wydruki
- 0
- Wyświetlenia
- 811
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
Features
- Foldable
- Adjustable
- Compact - the size of a credit card but thicker
- Print-in-place joints, no assembly required
- Charging port for vertical/portrait orientation
Printing
- Prototyped on a Prusa i3 MK3S(+)
- Sliced in PrusaSlicer 2.5.2
- PLA 1.75mm filament
- 0.2mm layer height
- 0.4mm nozzle
After Printing
- Gently ease the top of the stand up from the frame to disengage it from the retaining lip
- Raise the stand up about 80 degrees; it won't go all the way to vertical so try not to force it
- Gently ease the legs away from the stands, separating the the crossbar from the stand and allowing the pins to travel along the guides in the frame
- Once the legs travel all the way to the end of the frame, open and close the stand a few times to loosen up the pins embedded between the top of the legs and the stand
Use
- Open the stand
- Place the pin legs against the stops along the guides to set the desired angle
- Rest phone on the stand in the retaining groove
- (optional) Place stand on the edge of a table to plug in a USB cable when phone is in vertical/portrait orientation