"AD LG ND" Lomograflok ND Gel Filter Frame and Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add removable ND or colored gel filter capability to your Lomograflok Instax Wide back.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 631
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Print in your choice of height, but stay around 0.15-0.2 on a 0.4 nozzle. It should be all lines, so no infill settings needed.
Files are exported as .3mf from Fusion360 and are not in the correct orientation. AD_LG_ND_orca.3mf has the correct orientation for all pieces.
AD_LG_ND_insert_top & AD_LG_ND_insert_bottom will sandwich your choice of ND/gel material. Once glued together and dry, it should then pop in and out of the frame below. If your ND or color gel is thicker than 1mm and rigid enough, then you may not need the AD_LG_ND_insert_top.
AD_LG_ND_frame - Here you have 2 options:
- v2a has a lip that requires supports, but makes attaching it easier.
- v2b has no lip, no supports, is easier to print but trickier to glue in.
Either should be able to glue in permanently without impacting non ND use.
The ND or color gel should be about 68.5 x 106.5 and can be whatever thickness as the sandwich will just protrude into the 4x5 opening on the camera.
This is a remix of an original concept by @drysdalephoto on IG