1 / 2

Copepod Hotel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Kyle O'Neill

@KyleONeill_701400

A place for your copepods to call home. Print in PETG.

Ocena: 0 / 5
Polubienia: 5
Pobrania: 192
Wydruki: 0
Wyświetlenia: 2000
Oceny: 0

Aktualizacja u źródła: 25 cze 2023

Informacje o modelu

Źródło: Printables
Kategoria: Pets
Licencja: Creative Commons — Public Domain

Szczegóły Pliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (7)

I recommend against printing the cover. I need to improve it and currently the sides of the cover and sometimes the legs fail to be detachable from the supports. I need to do more research into this before I can recommend printing the cover. I repeat, DO NOT PRINT THE COVER.

I recommend petg and I recommend 0.4mm nozzle. Ideal orientation is each part touching the board with the cover, legs up. Increase cover scale 1% for ideal fit as well.

The print takes a while, and I have no explanation for that. It usually takes a long time to slice as well because the model is mostly walls.

I am not sure infill % makes any difference but I have also not checked. I only needed one.